固体超强酸催化合成水杨酸正丁酯

用固体超强酸SO4^2-/Fe2O3-TiO2为催化剂，实现了水杨酸和正丁醇反应合成水杨酸正丁酯。最佳合成条件为n(醇)：n(酸)＝2．0：1，催化剂用量为酸质量的5％，反应时间为4．5h，酯化率可达96％。催化剂具有容易回收并可循环使用、不污染环境等优点。     

厌氧/好氧生物流化床耦合处理垃圾渗滤液的新工艺研究

采用厌氧/好氧生物流化床耦合工艺处理垃圾渗滤液。探索了厌氧/好氧的耦合及各种工艺操作条件对垃圾渗滤液生物降解效率的影响,并对其影响机理进行了初步的探讨。结果表明,经过高效厌氧流化床的处理, 垃圾渗滤液的可生化性可提高49.1%。CODCr/NH4+-N比值对渗滤液好氧生物降解性能有较显著的影响,适宜的CODCr/NH4+-N比值应控制在7.6左右。当进水CODCr及NH4+-N浓度分别为5000mgL-1、280mgL-1左右时,系统出水主要指标达到GB16889-1997一级排放标准。当系统受到短时间(12h左右)超过正常运行负荷约3倍的负荷冲击时,能在4d左右的时间内恢复正常。本研究为垃圾渗滤液的治理提供了新的解决方案。     

Selection of quaternary ammonium groups for optimizing properties of water‐soluble,photosensitive phenolic resins and study of their postcuring mechanism

This article deals with the selection of quaternary ammonium groups for synthesis of water‐soluble, photosensitive phenolic resins, containing acrylate and different quaternary ammonium salt groups (AQSPRs), via ring‐opening reactions of epoxy phenolic resin (EPR) with acrylic acid and with different tertiary amine‐protonic acid salts. Conversion of epoxy groups, solubility, photosensitive properties, and thermal decomposition of the different AQSPRs were compared. Modification of AQSPR with methanol solution of KOH to form phenolic resin containing both quaternary ammonium hydroxide groups and acrylate groups (AQHPR) was also studied. Characterization by IR spectrum, DSC, and thermal gravimetric analysis was carried out. The results showed that in the synthesis of AQSPRs containing different quaternary ammonium salt groups, the efficiency of ring‐opening reaction of epoxy phenolic resin with tertiary amine salt in terms of conversion of epoxy groups decreases in the following order: for the tertiary amine, N,N‐dimethyl benzylamine (DMBA) > triethylamine (TEA) > trimethylamine (TMA) > N,N‐dimethyl aniline (DMA) > triethanolamine (TENA) > tri(n‐butylamine) (TBA); for the protonic acid, HCl > HBr > HCOOH > HI > NaHSO₃ > Cl₃CCOOH > HClO₄ > HBF₄. All the AQSPRs except that from HClO₄ can be dissolved in water, methanol, DMF, or DMSO. The gel content formed during UV exposure decreases in the following order of acids used in forming quaternary ammonium salt groups: HCl > HCOOH > NaHSO₃ > Cl₃CCOOH; or decreases in the following order of tertiary amines or hydrohalic acids used in forming the quaternary ammonium groups: TMA. > TEA > DBMA; HCl > HBr > HI. During thermal decomposition of EPR with about half epoxy groups of EPR ring‐opened with tertiary amine salt at 160°C for 0.5 h, water‐insoluble product was formed. The insoluble content and the % decrease of epoxy groups or halide ions increase in the following order: TMA < TEA < DMBA; HCl < HBr < HI. The % decrease of epoxy groups for the insoluble residue is nearly equal to the % decrease of halide ions. A crosslinking reaction mechanism occurred in the thermal decomposition was thus proposed. During the modification of AQSPR with KOH, conversion of quaternary ammonium chloride groups can reach above 90%. The decomposition temperature of the quaternary ammonium groups was lowered from 204 to 120°C after modification of AQSPR with KOH. The photosensitive properties of the resin after modification became lower. It is better to react DMBA · HCl with EPR so as to obtain a product with higher conversion of epoxy groups, good water solubility, moderate photosensitivity, lower decomposition temperature, and better postcuring. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2914–2922, 2004     

智能站二次设备的运行分析

比较了智能变电站与常规站的管理和结构特点,深入研究了二者的差异以及智能变电站二次设备运行的调试、维护等相关问题,并且提出了几点建议,以期对实际工作起到一定的指导作用。     

户内变电站三维设计应用研究

目前,户内变电站普遍采用二维设计,整个工程设计依靠设计人员的空间想象力和工程制图技能完成三维空间设计,这种方法缺乏对设计质量的有效控制,已难以适应目前各电网公司对设计精细化的需求。户内变电站三维设计具有直观、智能等特点,在适应了复杂的户内变电站设计、不断压缩的设计周期和设计资料的数字化移交等要求的同时,完善了工程设计人员充分表达设计思想的手段,是一种能提高项目质量的助推器,也是实现变电工程全寿命周期管理的有效工具,更是未来变电工程设计的发展趋势。     

采煤工作面瓦斯抽采技术的应用探讨

瓦斯是世界公认的温室气体之一,是矿井生产中散发的一种有毒气体,会直接影响矿井的安全生产。但从能源角度看,瓦斯是一种清洁度较高的能源。因此,引入瓦斯治理技术是十分必要的。就采煤工作面瓦斯抽采技术的应用进行了分析、讨论,希望对相关单位有所帮助。     

经验分析电价与电费管理的稽查

为进一步提升电价与电费管理的工作质量,采取有效措施、深入落实各管理环节的稽查工作是非常必要的。结合自身的工作经验,以电价稽查、电费账务处理等内容为切入点,对电价与电费管理的稽查作一综述,以供业内同行参考。     

复合泡沫塑料的性能改进研究

为改善复合泡沫塑料的介电性能,采用金属氧化物粒子填充改性双马来酰亚胺空芯玻璃微球复合泡沫塑料得到了高介电常数、低介质损耗因数、低密度、力学性能良好的电介质材料。     

布朗工艺一段转化炉的模拟计算

在建立炉膛燃烧传热模型和管内气固相催化反应模型的基础上对布朗工艺合成氨装置一段炉辐射段进行模拟计算.炉膛燃烧传热过程采用Hottle区域法建立三维辐射换热模型,与管内的气固相催化反应动力学模型迭代求解,得出了炉膛三维温度分布以及管内温度、压力、组成随高度的分布.计算结果与实测值基本吻合.由于炉膛燃烧传热模型采用三维模型,与传统的一维和二维模型比较,计算结果更为精确.计算方法和结果对于节能降耗以及设备的改进等都有非常重要的意义.